网页即时交流
QQ咨询
咨询热线
020-28998648
  • s0
  • s3
dynon skyview常用的设置(重启、截图等)
599
0

1、How to Reboot the Display

重启

Press and hold buttons 1, 2 and 5 simultaneously to instantly reboot the system

重新启动 - 同时按下按钮#1、#2和#5

2、How to Enter the Setup Menus

进入设置

pressing and holding buttons 7 and 8 will open Setup Menus

设置菜单 - 同时按住按钮#7和#8

3、How to Adjust Time Zone Offset如何调整时区偏移

First, configure the Top Bar to display time in SETUP MENU > LOCAL DISPLAY SETUP > TOP BAR SETUP > TIME: ZULU | LOCAL. Then, adjust your preferred offset from the time currently displayed on the Top Bar – SETUP MENU > SYSTEM SETUP > TIME.

4、How to Configure Units of Measure如何配置测量单位

Displayed units can be configured for altitude, distance and speed, temperature, barometer, pressure, and volume. Displayed units are configured on the Measurement Units Page (SETUP MENU > SYSTEM SETUP > MEASUREMENT UNITS).

5、开关机

开关机 - 按住按钮#1

6、屏幕截图

屏幕截图 - 同时按下按钮#2和#7


3
打赏
收藏
点击回复
      全部留言
  • 0
更多回复
Dynon航空电子设备
      圈内贴子36
  • 通航圈成员14

扫一扫访问手机版